IMER Vertical Shaft Mixers are designed and engineered from IMER’s concrete division of batch mixers and can handle the most impossible of mix designs. Mix up to 3/8” aggregate and mix it dry. Used in many precast shops, job sites that require the mix of stiff mud for floor screed, refractory applications or even mixing epoxy or fast set concrete for use on roadways.
|
The Lightweight, Quiet, Portable Yet Powerful Mix-All 60 Saves Time and Reduces Labor Costs
The Mix-All 60 is a one-person “repair-work-made-easy” solution. If you need to mix mortar in the attic to tuckpoint a chimney, your lightweight and easily-portable answer is the Mix-All 60. The 110V motor gearbox drivetrain is both powerful, and quiet. For fast production, line up 2 or 3 mixers, and have one mixing at all times. The unique paddles allow it to quickly and thoroughly mix mortar, stucco, thin set, dry pack mortar, epoxy, plaster, and more. Model # 1193988 | 110V/60Hz, 0.75 HP Standard Equipment
• 3/4 HP, 120V motor • Hi torque gearbox drive • 4" Wheelbarrow pneumatic wheels • 14 gallon drum capacity • 12 gallon batch output • Newly engineered paddle good for mixing mortar, stucco and grout Optional equipment
• Fine Mortar Mixing Paddle • 5 Pack of Buckets |
|
Vertical Shaft Mixer with Powerful Mixing Action
The Mix 120 Plus can make a wheelbarrow of mortar, stucco, grout, or dry pack cement every 3 minutes. Vertical shaft mixers deliver so much mixing torque that the Mix 120 Plus can out produce a two-bag towable mixer when making dry pack cement. Team the continuous mixer with an IMER spray and grout pump for semi-automatic production. Model # 1194302 | 110V/60Hz, 2 HP, Single-Phase, includes iDUST® Grate Model # 1194304 | 110V/60Hz, 2 HP, Single-Phase, includes Open Grate Formerly named the Mortarman 120 Standard Equipment
• 2 HP, 110V motor • Hi-torque gearbox drive with reverse • Hard solid wheels • Loading wheels • 4.25 cu ft drum capacity • 3 cu ft batch output • Vertical paddles good for mixing mortar, stucco and grout • New iDust Grate (dust abatement grate) • Rubber paddles |
|
Vertical Shaft Mixer with Powerful Mixing Action
Using our mixer technology found in our Mix series we combined the need to mix 2 bags of fireproofing per batch on 120V. The Mix 200 FP is a non towable, portable mixer that can fit over sprayer pumps to discharge into the hopper. The extra large opening of the iDust grate makes it possible to load the mixer and still keep the dust under control. Model # 1195163 | 110V/60Hz, 1.5 HP, Single-Phase, includes iDUST® Grate |
|
The Mix 360 Offers Unparalleled Production and Jobsite / Plant Safety
Vertical shaft mixers use the principles of concrete batch plant design, which allows for the paddles to rotate through the mix rather than lift and drop it as conventional mortar mixers do. The Mix 360 vertical shaft towable mixers easily mix very low slump materials like dry pack mortar and refractory cement. Model # 1194661 | 13 HP Honda GX Model # 1194662 | 220V/60Hz, 5.5 HP, Single-Phase Formerly named the Mortarman 360. |
|
Produce 16 cubic feet of Mud Every Three to Four Minutes with the Mix 750
The Mix 750 is the perfect partner for busy precast mixing operations. The discharge system is easy to open and close and protected from being hit by a mud bucket or forklift. The safety grate is hinged, making access immediate. The Mix 750 is Mini-Batch Plant production for the cost of a mortar mixer. These mixers develop vast amounts of mixing power, far more than any horizontal shaft mortar mixer. The ability to mix refractory mud or stiff, dry materials is unparalleled in the industry. Model # 1194640 | Model without Motor Model # 1194644 | 220V/60Hz, 5 HP, Single-Phase Model # 1194645 | 220V/60Hz, 7.5 HP, 3 Phase Model # 1194646 | 440V/60Hz, 7.5 HP, 3 Phase Model # 1194648 | 13 HP Honda GX Formerly named the Mortarman 750. |
|
Warning: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov/
EQUIPMENT |
LINKS |
ABOUT USCONTACT US |
|