Equipment > Pumps > Continuous Pumps > Koine 3.1

KOINE 3.1

Continuous Operation With The Extra Benefit Of Wet Or Dry Mode

The Koine 3.1 is designed to be a continuous pump for feeding bags of dry material such as underlayment, mortar or grouts. But when you need to mix the material with lots of additives which require longer mixing times then switch to wet mode, use a seperate mixer such as the Mix 120 and pour it into the hopper to use it as just a pump. This gives the flexibility and versatility to be used for any application. Rinse out the hopper when finished.
​
Model # 1106351   |   4.5 HP, Single Phase

TECHNICAL SPECIFICATIONS

1	KOINE 3.1
Model #	1106351
Power Supply	240 V ​1Ø
Max Installed Power	4.5 HP
Mixer Motor Power	3 HP
Electric Pump Motor Power	.6 HP
Flow Rate - Dry Mode	1/4 - 3/5 cu ft / min
Flow Rate - Wet Mode	.08 - 3/5 cu ft / min
Hopper Volume	2.65 cu ft
Loading Height	39"
Dimension w/l/h	26 in x 42 in x 59 in
Weight	350 lbs

Standard Equipment

• D8 1.5 stator and rotor
• Material delivery pressure gauge
​• Control panel w/ exclusive IMER speed inverter
• Self-priming water booster pump
• Water system with flow meter and discharge valves
• 66’ of power cord
• 66’ of water hose Ø 19 mm (3/4”)
• 50’ of material hose Ø 25 mm (1”)
• Hose cleaning kit with toolbox
• Mixing chamber clean out tool
• Air compressor ready

Optional equipment

• Dual diaphragm compressor -Part # 1107637 
• Mortar, stucco and fireproofing gun kit -Part # 1107005
• D5 - 2.5 Rotor -Part # 1107085
• D5 - 2.5 Stator -Part # 1107084
• Turbo mixer (use with Part # 1107029 & # 1107028) -Part # 1107517
• 50’ x 25mm material hose - Part # 1107525 
• 33’ x 25mm material hose - Part # 1107526 
• 16’ x 25mm material hose - Part # 1107527 
• 5’ overhead wand - Part # 1107549
• D8 - 1.5 Rotor with tab  - Part # 1107029
• D8 - 1.5 Stator - Part # 1107028
• ​SLU mixing paddle for light materials - Part # 1107597

Product Sheet

---